Omron NJ Series - Page 444

9-53
9 Backup Functions
NJ-series CPU Unit Software User’s Manual (W501)
9-11 Backup-related Files
9
9-11-8 Specifications of CJ-series Unit Verification Results File
Note The verification results are given only for the EtherCAT slaves that were compared.
File contents Description
[Verification Results]
; --- CJ Unit Parameters. ---
[Rack0 Slot0: CJ1W-CRM21(MODE0) UnitNo.10]
Result=Matched
[Rack0 Slot9: CJ1W-DRM21 UnitNo.0]
Result=Not matched
[Rack1 Slot0: CJ1W-EIP21 UnitNo.10]]
Result=Matched
[Rack1 Slot1: CJ1W-PRM21-DPV1 UnitNo.1]
Result=Not matched
The Units are given in the following format:
Rack{Rack No.}[space]Slot{Slot No}:[space]{Unit
model}[space]Unit No.{unit number}
Rack No.:
Text string of decimal numbers. The value will
be between 0 and 3.
Slot No.:
Text string of decimal numbers. The value will
be between 0 and 9.
Unit Model
Text string that identifies the Unit model.
The Unit model is obtained from the cyclic ini-
tialization data. Consecutive spaces at the end
of the model number are deleted.
Unit No.:
Text string of decimal numbers.
Leading zeros are suppressed. Range for a
CPU Bus Unit: 0 to 15. Special I/O Units: 0 to
95.
The match/no match results are given in the following
format:
Result=Matched: No differences were found.
Result=No matched: Differences were found.