Omron NJ Series User Manual

10 Communications Setup
10-8
NJ-series CPU Unit Software User’s Manual (W501)
 Sending and Receiving Files
You can send and receive files on the SD Memory Card that is inserted in the NJ-series CPU Unit
from an FTP client application.
 Socket Services
You can directly use TCP or UDP from the user program to send and receive any data with remote
nodes between a host computer and the Controller, or between Controllers. The socket services are
supported only for the built-in EtherNet/IP ports.
FTP client application
Sending and Receiving Files
SD Memory Card
EtherNet/IP
FTP server
Communications
EtherNet/IP
Socket service
instruction

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model