Omron NJ Series User Manual

11 Example of Actual Application Procedures
11-10
NJ-series CPU Unit Software User’s Manual (W501)
Change the CPU Unit to RUN mode.
• Turning the Servo ON and OFF: Execute the MC_Power motion control instruction.
• Jogging: Execute the MC_MoveJog motion control instruction.
Homing: Execute the MC_Home instruction.
Select Operation Mode
 RUN Mode from the Controller Menu. If an error occurs, investigate the
cause and edit the user program.
Manual Operation
Homing
Actual Operation

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model