Omron NJ Series User Manual

Appendices
A-68
NJ-series CPU Unit Software User’s Manual (W501)
Variable name _EC_MacAdrErr
Meaning MAC Address Error Global/local Global
Function TRUE if there is an illegal MAC address.
Data type BOOL Range of values TRUE or FALSE
R/W access R Retained Not retained. Network Publish Published.
Usage in user program Possible. Related instruc-
tions
Reset EtherCAT Controller Error
• ResetECError
Variable name _EC_LanHwErr
Meaning Communications Controller Error Global/local Global
Function TRUE if there is a communications controller hardware error.
Data type BOOL Range of values TRUE or FALSE
R/W access R Retained Not retained. Network Publish Published.
Usage in user program Possible. Related instruc-
tions
Reset EtherCAT Controller Error
• ResetECError
Variable name _EC_LinkOffErr
Meaning Link OFF Error Global/local Global
Function TRUE if the communications controller link is not established.
Data type BOOL Range of values TRUE or FALSE
R/W access R Retained Not retained. Network Publish Published.
Usage in user program Possible. Related instruc-
tions
Reset EtherCAT Controller Error
• ResetECError
Variable name _EC_NetCfgErr
Meaning Network Configuration Information Error Global/local Global
Function TRUE if there is illegal network configuration information.
Data type BOOL Range of values TRUE or FALSE
R/W access R Retained Not retained. Network Publish Published.
Usage in user program Possible. Related instruc-
tions
Reset EtherCAT Controller Error
• ResetECError
Variable name _EC_NetCfgCmpErr
Meaning Network Configuration Verification Error Global/local Global
Function TRUE if the network configuration information does not match the actual network configuration.
Data type BOOL Range of values TRUE or FALSE
R/W access R Retained Not retained. Network Publish Published.
Usage in user program Possible. Related instruc-
tions
Reset EtherCAT Controller Error
• ResetECError
Variable name _EC_NetTopologyErr
Meaning Network Configuration Error Global/local Global
Function TRUE if there is a network configuration error (too many devices connected or ring connection).
Data type BOOL Range of values TRUE or FALSE
R/W access R Retained Not retained. Network Publish Published.
Usage in user program Possible. Related instruc-
tions
Reset EtherCAT Controller Error
• ResetECError

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model