A-127
Appendices
NJ-series CPU Unit Software User’s Manual (W501)
A-12 Version Information
App
A-12-2 Functions That Were Added or Changed for Each Unit Version
Note Refer to the manuals for the function modules for additions and changes to function module functions for
each unit version of the CPU Units.
Addition of Mountable CJ-series Units
The CJ-series Units that can be mounted have increased for the new unit version of the CPU Unit.
For details, refer to NJ-series CPU Unit Hardware User’s Manual (Cat. No. W500).
Additions and Changes to Basic Instructions and Motion Control Instructions
The basic instructions and motion control instructions that you can use have increased or changed
for the new unit version of the CPU Unit. For details, refer to the NJ-series Instructions Reference
Manual (Cat. No. W502) and NJ-series Motion Control Instructions Reference Manual (Cat. No.
W508).
Additions and Changes to Controller Events
The events that can occur have increased or changed for the new unit version of the CPU Unit.
There are also changes in the recovery methods to use when some errors occur.
For details, refer to the NJ-series Troubleshooting Manual (Cat. No. W503).
Additions and Changes to System-defined Variables
The system-defined variables that you can use have increased or changed for the new unit version
of the CPU Unit. Refer to A-3 System-defined Variables for details.
Security Asset protec-
tion and pre-
venting
incorrect oper-
ation
Protection Data protec-
tion
Addition 1.01 1.02 8-4-4 Data Protection
Operation
authority verifi-
cation
Number of
groups
Change 1.01 1.02 8-4-5 Operation
Authority Verification
SD Memory
Cards
Application Automatic transfer from SD
Memory Card
Addition 1.03 1.04 9-4 Automatic Trans-
fers from SD Memory
Cards
Backing up
data
SD Memory
Card backups
Operating
methods
CPU Unit
front-panel
DIP switch
Addition 1.03 1.04 9-2 SD Memory Card
Backups
Specification
with system-
defined vari-
ables
Addition 1.03 1.04
SD Memory
Card Dialog
Box in Sysmac
Studio
Addition 1.03 1.04
Special
instruction
Addition 1.08 1.09
Protection Disabling
backups to SD
Memory Cards
Addition 1.03 1.04 9-3 Disabling Back-
ups to SD Memory
Cards
Sysmac Studio Controller backups Addition 1.03 1.04 9-5 Sysmac Studio
Controller Backups
Function
Addition/
change
Unit
version
Sysmac
Studio
version
Reference
To Next Page
Loading...
Need help?
General
