Omron NJ Series User Manual

2 CPU Unit Operation
2-24
NJ-series CPU Unit Software User’s Manual (W501)
Other
Data
Event Logs
The event logs include the error log for the Controller, and logs of
events other than errors, such as when the power supply was
turned ON and OFF and when operation started.
Absolute Encoder Home Off-
sets
This data is used to restore the actual position of a Servo Drive with
an absolute encoder in motion control. The offset is the difference
between the command position after homing and the absolute data
that is read from the absolute encoder.
Type of data Description

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model