SOCT Copernicus PLUS - Service Manual
SOCT Copernicus+ has been classified as CLASS 1 LASER DEVICE
Important!
1) If the whole Medical System has been installed by Manufacturer or Authorized
Personnel of SOCT Copernicus+, the Manufacturer guarantees correct installation and
compliance with all required standards and directives,
2) In case when installation was made not by Manufacturer or Authorized Personnel,
Manufacturer of SOCT Copernicus+ takes NO responsibility for any problems or risks
that could be created by incorrect connection and violation of safety standards,
3) Manufacturer of SOCT Copernicus+ takes no responsibility for incorrect medical
diagnose of results and takes no responsibility for the consequences of such incorrect
medical diagnosis.
Warning!
Ignoring safety rules can lead to accidents.
1) If SOCT Copernicus+ and the whole Medical System have been installed by the
Manufacturer or Authorized Personnel, the Manufacturer guarantees the proper
installation and compliance with MDD 93/42 EEC rules,
2) Any computer system or device attached to SOCT Copernicus+ must be MDD compliant
or be plugged only to Separating Transformer. Devices which are not related with
patient examination (e.g. lamp, fan) cannot be connected to Separating Transformer,
3) Multiple portable socket-outlets shall not be placed on the floor.
Warning!
All activities that demand removing main body housing may be performed by Manufacturer or
Authorized Personnel trained by Manufacturer.
Ignoring or disregarding the statements above may lead to danger of death or serious injury.
To Next Page
Loading...
