SOCT Copernicus PLUS - Service Manual
11.2 Left-right movement engine
Tools needed to replace engine:
- hexagonal tools size: 2, 2.5
- magnetic holder,
1. Read entire manual first before you start opening the SOCT PLUS.
2. Undo the engine screws and unscrew 2 screws holding engine frame to its supporter.
Unscrew 4 screws holding engine to its frame.
3. Cut plastic band holding engine cable, unplug engine plug from the socket.
4. To assembly new engine follow upper steps in opposite order.
5. Make sure that new engine’s rack is parallel to the toothed bar, if not – perform regulations!
To Next Page
Loading...
