Oracle Database Appliance X6-2-HA Service Manual

Remove a Storage Drive
Drive Slot Numbers and
Types Supported
Drive Slot Numbers and
Types Supported
Drive Slot Numbers and
Types Supported
Drive Slot Numbers and
Types Supported
HDD0 HDD1 HDD2 HDD3
Server Node boot drives. Each appliance server node contains two boot drives that are
installed in the back of Oracle Database Appliance and identified on the rear drive panel label.
The following table shows the location and numbering of the boot drives.
Callout Drive Locations and Identification
1 Boot Drives at the back of server node 1. Location and identification of the server node 1 boot drives as
listed in Oracle ILOM:
■
/SYS/MB/RHDD1
■
/SYS/MB/RHDD0
2 Boot Drives at the back of server node 0. Location and identification of the server node 0 boot drives as
listed in Oracle ILOM:
■
/SYS/MB/RHDD1
■
/SYS/MB/RHDD0
Remove a Storage Drive
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
154 Oracle Database Appliance Service Manual • November 2017

Oracle Database Appliance X6-2-HA Specifications

General

Brand	Oracle
Model	Database Appliance X6-2-HA
Category	Storage
Language	English