Install Storage Drive
Install Storage Drive
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
This section describes installing a storage drive in Oracle Database Appliance Version 1.
1.
Determine the drive slot location for the replacement drive.
Drives are physically addressed according to the slot in which they are installed. See “Storage
and Boot Drive Locations” on page 153 for drive locations.
2.
Slide the drive into the drive slot until it is fully seated.
156 Oracle Database Appliance Service Manual • November 2017