Remove Faulty DIMMs
b.
Carefully lift the DIMM straight up to remove it from the socket.
Callout Description
1 DIMM connector slot
2 DIMM connector key
3 DIMM ejector lever
4.
Replace each faulty DIMM with either another DIMM of the same rank size.
For DIMM replacement instructions, see “Install DIMMs” on page 174.
Caution - Do not operate the system with an empty DIMM slot. If you remove a DIMM, you
must replace it before starting the server.
Appendix A • Servicing the Oracle Database Appliance Version 1 173
To Next Page
Loading...
