Servicing the Hardware
To service the appliance hardware components, use the following sections:
■
“Getting Started with Servicing the Hardware” on page 11
■
“Prerequisites for Servicing Hardware” on page 39
■
“Servicing the ZS4-4 Controller” on page 44
■
“Servicing the ZS3-4 Controller” on page 76
■
“Servicing the ZS3-2 Controller” on page 112
■
“Servicing the 7x20 Controller” on page 156
■
“Servicing the Disk Shelves” on page 234
For information on maintaining the system, such as updating the software and backing up the
configuration, see “Maintaining the System” on page 267.
Getting Started with Servicing the Hardware
To get started with servicing the hardware, use the following sections.
Introduction to the BUI
The Browser User Interface (BUI) is the graphical tool for administration of the appliance.
The BUI provides an intuitive environment for administration tasks, visualizing concepts, and
analyzing performance data.
The management software is designed to be fully featured and functional on a variety of web
browsers, as described in “Browser User Interface (BUI)” in Oracle ZFS Storage Appliance
Administration Guide, Release 2013.1.5.0. Direct your browser to the system using either the
IP address or host name you assigned to the NET-0 port during initial configuration as follows:
https://ipaddress:215 or https://hostname:215. The login screen appears. The online help linked
in the top right of the BUI is context-sensitive. For every top-level and second-level screen in
the BUI, the associated help page appears when you click the Help button.
Servicing the Hardware 11
To Next Page
Loading...
Need help?
General