Getting Started with Servicing the Hardware
Property Description
Serial System chassis hardware serial number
Processors Count and description of processors in the system
Memory Total memory in the system
System Size and number of system disks used for the system
image
Data Size and number of data disks in the system chassis. This
is only valid for standalone systems. If there are no data
disks present, "-" will be displayed.
Cache Size and number of cache disks in the system chassis.
This is only valid for expandable systems that support
additional disk shelves. If there are no cache disks
present, "-" will be displayed.
Log Size and number of log disks in the system chassis. This
is only valid for standalone systems. If there are no log
devices present, "-" will be displayed.
Total Total size and count of all disks in the system.
Disk Shelves
A list of disk shelves, if supported, is displayed at the bottom of the view. The thumbnail to the
left represents the front of the currently selected disk shelf. Clicking on the right-pointing arrow
or double-clicking on a row within the list will provide complete details about the disk shelf.
The state indicator will be orange if the chassis contains any faulted components. The following
fields are displayed in the list:
TABLE 3
Disk Shelf Properties
Property Description
Name Name of the disk shelf, used in faults and alerts. This is
initially set to the serial number of the disk shelf, but can
be changed by clicking on the name within the list.
MFR/MODEL The disk shelf manufacturer and the model number.
RPM Revolutions per minute; the speed of the disk drive.
Data Total size of all data disks within the disk shelf.
Cache Total size of all read-optimized cache devices
("Readzillas") within the drive shelf. There are currently
no supported disk shelves with read cache devices, but
this may not always be the case. If there are no cache
devices within the shelf, then "-" is displayed.
Log Total size of all write-optimized cache devices
("Logzillas") within the drive shelf. If there are no log
devices within the shelf, then "-" is displayed.
14 Oracle ZFS Storage Appliance Customer Service Manual • February 2016
To Next Page
Loading...
Need help?
General