Panasonic CZ-256ESMC3 - Page 190

190
Conguring the Hybrid GHP/EHP control
Setting
11
Set the control delay time/release delay
time.
11
Item Explanation
Ctrl delay time
(min)
Set the time (0 to 60 minutes) to delay
when the demand level increases.
Release delay
time (min)
Set the time (0 to 60 minutes) to delay
when the demand level decreases.
12
Touch [Register].
z The settings are registered and the operation dialogue
closes.
z To cancel the settings, touch [Cancel].
12
Setting delay times [Delay time settings]