Panasonic FP0R Series User Manual

Analog Input Averaging Processing
5-2
5.1 Types of Averaging Processing
5.1.1 Moving Average 10 Times
When the averaging function is set to on, the internal processing of the analog unit is as
shown in the diagram below
 Moving Average Processing
• Averages and stores converted values obtained by sampling.
• Calculates the average of data for past eight times excluding the maximum and minimum
values from the latest data, and stores it in the external input area (WX). If a fraction results
from the calculation, it is rounded off.
Operation item
Timing chart
Analog input value
Reading time
Internal processing
for ch0
Digital input value
(Note):The above figure shows the processing when the number of input channels is two.

Panasonic FP0R Series Specifications

General

Model	FP0R Series
Expansion	Up to 3 expansion units
Type	Programmable Controller
Processing Speed	0.08 µs/step
Communication Ports	RS232C, RS485
Power Supply	24 V DC
Operating Temperature	0°C to 55°C
I/O Points	Up to 128 points
CPU Type	32-bit RISC
Program Memory	Flash ROM
Dimensions	90mm x 60mm x 25mm (varies by model)