313
Manual No. Date Description of changes
• explanations and examples relating to high-speed counter and pulse
output instructions
• programming example for analog potentiometer
• programming example for thermistor input function
• information on F143 in table of Instructions
ARCT1F333V5.0END May 2005 Additions
• Thermistor input type
• Internal circuit diagram for C28 in chapter 2
• FPG Expansion Data Memory in chapter 3
• Other expansion units in chapter 3
• Troubleshooting solution for communication error via RS232C
• Table of MEWTOCOL error codes
• Connection diagrams for motor drivers
Corrections/Updates
• Input and output specifications in chapter 2
• Description of thermistor input function in chapter 2
• Terminal layout diagram of FPG expansion unit (NPN type) in
chapter 3
• FPWIN Pro examples in chapter 6
• FPWIN Pro examples updated/corrected in chapter 7
• Description of communication with external devices (general-
purpose mode) updated in chapter 7
Structural changes
• Control unit types C32T and C32TTM deleted
• Procedures and examples for FPWIN GR removed in all chapters
• FPWIN GR instructions removed from appendix
• Chapter 12 (Other Functions) moved to chapter 2
• Communication cassettes and communication modes combined into
one chapter (chapter 7)
ARCT1F333V6.0END March 2006 Terminological changes
• New names for communication modes:
old: computer link, new: MEWTOCOL-COM Slave
old: general-purpose serial communication, new: program controlled
communication
• Time to change backup battery corrected from 20 seconds to 2
minutes
To Next Page