4.3.9.2 Shortcut Key Settings
Soft Key A (Left)
Description Specifies whether to enable the XML application or operate the
telephone normally, when the corresponding button is pressed during
standby mode.
Value Range
• Yes
• No
Default Value No
Configuration File Reference XML_INITIATE_KEY_SOFT1 (Page 208)
Soft Key B (Center)
Description Specifies whether to enable the XML application or operate the
telephone normally, when the corresponding button is pressed during
standby mode.
Value Range
• Yes
• No
Default Value No
Configuration File Reference XML_INITIATE_KEY_SOFT2 (Page 208)
Soft Key C (Right)
Description Specifies whether to enable the XML application or operate the
telephone normally, when the corresponding button is pressed during
standby mode.
Value Range
• Yes
• No
Default Value No
Configuration File Reference XML_INITIATE_KEY_SOFT3 (Page 208)
4.3.9.3 XML Phonebook
LDAP URL
Description Specifies the URL that is accessed when the phonebook is accessed,
to check for XML data.
Value Range Max. 256 characters
Default Value Not stored.
Configuration File Reference XMLAPP_LDAP_URL (Page 204)
Document Version 2015-12 Administrator Guide 101
4.3.9 XML Application Settings