Configuration File Reference HTTP_VER (Page 194)
HTTP User Agent
Description Specifies the text string to send as the user agent in the header of HTTP
requests.
Value Range Max. 64 characters
Note
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower
-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper
-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic {MODEL} hw01.00 fw{fwver} {mac}
Configuration File Reference HTTP_USER_AGENT (Page 195)
Authentication ID
Description Specifies the ID for the User account. If set, this name must be entered
to access the Web user interface at the User access level.
Value Range Max. 128 characters
Default Value Not stored.
Configuration File Reference HTTP_AUTH_ID (Page 195)
Authentication Password
Description Specifies the password for the User account. If set, this password must
be entered to access the Web user interface at the User access level.
Value Range Max. 128 characters
Default Value Not stored.
Configuration File Reference HTTP_AUTH_PASS (Page 195)
4.3.3.2 Proxy Server
Enable Proxy
Description Selects whether to enable or disable the HTTP proxy feature.
86 Administrator Guide Document Version 2015-12
4.3.3 HTTP Client Settings
To Next Page
Loading...
