Enable Port Punching for RTP
Description Specifies the interval, in seconds, between transmissions of the Keep
Alive packet in order to maintain the NAT binding information for RTP
packet.
Value Range 0, 10–300
0: Disable
Default Value 0
Configuration File Reference RTP_PORT_PUNCH_INTVL (Page 236)
4.5.2 SIP Settings [Line 1]–[Line 2]
This screen allows you to change the SIP settings that are specific to each line.
Document Version 2015-12 Administrator Guide 119
4.5.2 SIP Settings [Line 1]–[Line 2]
To Next Page
Loading...
