Panasonic KX-HDV130 - Rtp_Close_Enable_N

Value Range 0–1
– 0: Send RTCP signals using the value specified in
"RTCP_INTVL_
n
", if the "RTCP_ENABLE_n" parameter is enabled.
– 1: Send RTCP signals using the value specified in the SDP attribute
"a=rtcp:".
Default Value 0
RTP_CLOSE_ENABLE_n
Parameter Name Example RTP_CLOSE_ENABLE_1, RTP_CLOSE_ENABLE_2
Value Format BOOLEAN
Description Specifies whether to enable processing to close held RTP sockets.
Value Range
• Y
(Enable RTP Close)
• N (Disable RTP Close)
Default Value
N
RTCPXR_ENABLE_n
Parameter Name Example RTCPXR_ENABLE_1, RTCPXR_ENABLE_2
Value Format BOOLEAN
Description Specifies whether to enable or disable RTCP
-XR.
Value Range
• Y: Enable RTCP-XR
• N: Disable
Default Value
N
Web User Interface Reference Enable RTCP-XR (Page 133)
5.3.27 SRTP Settings
SRTP_CONNECT_MODE_n
Parameter Name Example SRTP_CONNECT_MODE_1, SRTP_CONNECT_MODE
_2
Value Format INTEGER
Description Specifies the mode of SRTP feature.
Value Range
• 0: SRTP
• 1: RTP/SRTP
Note
• When RTP/SRTP is specified, operation is in RTP mode.
Default Value 1
268 Administrator Guide Document Version 2015-12
5.3.27 SRTP Settings