Panasonic KX-HDV130 - Auto DNS Via DHCP; Dns1; Dns2; Ethernet Port Settings

Default Value Not stored.
Configuration File Reference STATIC_GATEWAY_IPV6 (Page 183)
Auto DNS via DHCP
Description Selects whether to enable or disable the DNS server obtained by
DHCPv6.
Note
• This setting is available only when [Connection Mode] is set
to [DHCP].
Value Range
• Yes: Use DNS obtained by DHCPv6
• No: Not use (use static DNS)
Default Value Yes
Configuration File Reference DHCP_DNS_ENABLE_IPV6 (Page 184)
DNS1
Description Specifies the IP address of primary DNS server for IPv6.
Value Range Max. 39 characters
n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]
Default Value Not stored.
Configuration File Reference USER_DNS1_ADDR_IPV6 (Page 184)
DNS2
Description Specifies the IP address of secondary DNS server for IPv6.
Value Range Max. 39 characters
n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]
Default Value Not stored.
Configuration File Reference USER_DNS2_ADDR_IPV6 (Page 184)
4.3.2 Ethernet Port Settings
This screen allows you to change the connection mode of the Ethernet ports, LLDP and the VLAN settings.
Document Version 2015-12 Administrator Guide 81
4.3.2 Ethernet Port Settings