Panasonic KX-HDV130

Value Format INTEGER
Description Specifies the DSCP level of DiffServ applied to RTCP/RTCP-XR
packets.
Value Range 0–63
Default Value 46
Web User Interface Reference RTCP Packet QoS (DSCP) (Page 133)
MAX_DELAY_n
Parameter Name Example MAX_DELAY_1, MAX_DELAY_2
Value Format INTEGER
Description Specifies the maximum delay, in 10-millisecond
units, of the jitter buffer.
Value Range
3–50 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be greater than "NOM_DELAY"
– This value must be greater than "MIN_DELAY"
– "NOM_DELAY" must be greater than or equal to
"MIN_DELAY"
Default Value 20
MIN_DELAY_n
Parameter Name Example MIN_DELAY_1, MIN_DELAY_2
Value Format INTEGER
Description Specifies the minimum delay, in 10-millisecond
units,
of the jitter buffer.
Value Range
1 or 2 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be less than or equal to "
NOM_DELAY"
– This value must be less than "MAX_DELAY"
– "MAX_DELAY" must be greater than "NOM_DELAY"
Default Value 2
NOM_DELAY_n
Parameter Name Example NOM_DELAY_1, NOM_DELAY_2
Value Format INTEGER
Document Version 2015-12 Administrator Guide 265
5.3.26 RTP/RTCP/RTCP-XR Settings