Value Range 0, 200–2000 (0: No tone)
Note
• If the
value for this setting is "480,620", the unit will use a mixed
signal of a 480 Hz tone and a 620 Hz tone.
Default Value 425,0
Configuration File Reference REORDER_TONE_FRQ (Page 286)
Tone Timings
Description Specifies the pattern, in milliseconds, of reorder tones using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Note
• It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
Default Value 60,165,105
Note
• Avoid setting 1–50 for any of the values.
Configuration File Reference REORDER_TONE_TIMING (Page 287)
4.6.6 Import Phonebook
This screen
allows you to import phonebook data from a PC to the specified unit. For details, see 6.1.1 Import/
Export Operation.
Note
• If the existing phonebook data has an entry with the same name and phone number as an imported
entry, the imported entry is not added as a new entry.
• When you
begin transferring the phonebook data, the "Now Processing File Data" screen is displayed,
and the screen is periodically reloaded. Depending on your Web browser, the screen might not reload
Document Version 2015-12 Administrator Guide 151
4.6.6 Import Phonebook
To Next Page
Loading...
