Panasonic KX-HDV130

Forwarding Number (No Answer)
Description Specifies the phone number of the destination to forward calls to when
a call is not answered after it has rung a specified number of times.
Value Range Max. 32 characters
Default Value Not stored.
Ring Counts (No Answer)
Description Specifies the number of times that an incoming call rings until the call
is forwarded.
Value Range 0, 2–20
Default Value 3
Enable Shared Call
Description Selects whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
• Availability depends on your phone system.
Value Range
• Yes
• No
Note
• If you select [Yes], the SIP server will control the line by using
a shared-call signaling method. If you select [No], the SIP
server will
control the line by using a standard signaling method.
Default Value No
Configuration File Reference SHARED_CALL_ENABLE_n (Page 298)
Enable Key Synchronization
Description Selects whether to synchronize the Do Not Disturb and Call Forward
settings.
Note
• Even if
you select [Yes], this feature may not function properly
if your phone system does not support it. Before you configure
this setting, consult your phone system dealer/service provider.
Value Range
• Yes
• No
Default Value No
Document Version 2015-12 Administrator Guide 143
4.6.2 Call Control [Line 1]–[Line 2]