Description Specifies the subnet mask for IPv4.
Note
• This setting is available only when "CONNECTION_TYPE" is
set to "0".
• When you specify this parameter, you must specify
"STATIC_IP_ADDRESS" together in a configuration file.
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Empty string
Web User Interface Reference Subnet Mask (Page 78)
STATIC_GATEWAY
Value Format IPADDR
Description Specifies the IP address of the default gateway for the IPv4 network
where the unit is connected.
Note
• This setting is available only when "CONNECTION_TYPE" is
set to "0".
• When you specify this parameter, you must specify
"STATIC_IP_ADDRESS" and "STATIC_SUBNET" together in
a configuration file.
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Empty string
Web User Interface Reference Default Gateway (Page 79
)
USER_DNS1_ADDR
Value Format IPADDR
Description Specifies the IP address of the primary DNS server for IPv4.
Note
• This setting is available only when "CONNECTION_TYPE" is
set to "0".
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Empty string
Web User Interface Reference DNS1 (Page 79)
Document Version 2015-12 Administrator Guide 181
5.3.2 Basic Network Settings