Panasonic KX-HDV130 - Rtp_Target_Check

RTP_TARGET_CHECK
Value Format INTEGER
Description Specifies the diagnose level for received RTP.
Value Range
• 0: diagnose destination IP Address and port
• 1: diagnose destination IP address
• 2: diagnose destination port
• 3: diagnose nothing
Default Value 0
RTCP_ENABLE_n
Parameter Name Example RTCP_ENABLE_1, RTCP_ENABLE
_2
Value Format BOOLEAN
Description Specifies whether to enable or disable RTCP
(Real-Time Transport
Control Protocol). For details, refer to RFC 3550.
Value Range
• Y (Enable RTCP)
• N (Disable RTCP)
Default Value
N
Web User Interface Reference Enable RTCP (Page 133)
RTCP_INTVL_n
Parameter Name Example RTCP_INTVL_1, RTCP_INTVL_2
Value Format INTEGER
Description Specifies the interval, in seconds, between RTCP/RTCP-XR packets.
Value Range 5–65535
Default Value 5
Web User Interface Reference RTCP&RTCP-XR Interval (Page 133)
RTCP_SEND_BY_SDP_n
Parameter Name Example RTCP_SEND_BY_SDP_1, RTCP_SEND_BY_SDP_2
Value Format INTEGER
Description Specifies
whether to send RTCP signals by SDP (Session Description
Protocol).
Document Version 2015-12 Administrator Guide 267
5.3.26 RTP/RTCP/RTCP-XR Settings