4.3.6 LDAP Settings
This screen allows you to change the LDAP Settings.
4.3.6.1 LDAP
Enable LDAP
Description Selects whether to enable or disable the LDAP service.
Value Range
• Yes
• No
Default Value No
Configuration File Reference LDAP_ENABLE (Page 214)
Server Address
Description Specifies the server host of LDAP.
Value Range Max. 256 characters
Default Value Not stored.
Configuration File Reference LDAP_SERVER (Page 214)
Port
Description Specifies the port of server.
Value Range 1–65535
Default Value 389
Document Version 2015-12 Administrator Guide 91
4.3.6 LDAP Settings
To Next Page
Loading...
