Panasonic KX-HDV130

Description Specifies a prefix to add to the domain name when performing a DNS
SRV lookup using TCP.
Note
• This setting is available only when "SIP_DNSSRV_ENA
_n" is
set to "Y".
Value Range Max. 32 characters
Default Value _sip._tcp.
Web User Interface Reference SRV lookup Prefix for TCP (Page 123)
REG_EXPIRE_TIME_n
Parameter Name Example REG_EXPIRE_TIME_1, REG_EXPIRE_TIME_2
Value Format INTEGER
Description Specifies the length of time, in seconds, that the registration remains
valid. This value is set in the "Expires
" header of the REGISTER
request.
Value Range 1–4294967295
Default Value 3600
Web User Interface Reference REGISTER Expires Timer (Page 125)
REG_INTERVAL_RATE_n
Parameter Name Example REG_INTERVAL_RATE_1, REG_INTERVAL_RATE_2
Value Format INTEGER
Description Specifies the percentage of the "expires
" value after which to refresh
registration
by
sending a new REGISTER message in the same dialog.
Value Range 1–100
Default Value 50
REG_RTX_INTVL_n
Parameter Name Example REG_RTX_INTVL_1, REG_RTX_INTVL_2
Value Format INTEGER
Description Specifies the interval, in seconds, between transmissions of the
REGISTER request when a registration results in failure
(server no
reply or error reply).
Value Range 1–86400
Default Value 10
242 Administrator Guide Document Version 2015-12
5.3.22 SIP Settings