Panasonic KX-HDV130

Value Range 0–16000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 60,1000,3940
Configuration File Reference RINGBACK_TONE_TIMING (Page 288)
4.6.5.4 Stutter Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that
a voice mail is waiting, using 2 whole numbers separated by
a comma.
Value Range 0, 200–2000 (0: No tone)
Note
• If the value for this setting is "350,440", the unit will use a mixed
signal of a 350 Hz tone and a 440 Hz tone.
Default Value 425,0
Configuration File Reference DIAL_TONE4_FRQ (Page 284)
Tone Timings
Description Specifies the pattern, in milliseconds, of stutter dial tones to notify that
a voice
mail is waiting, using up to 22 whole numbers (off 1, on 1, off 2,
on 2…) separated by commas.
Note
• It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 60,165,165,165,165,165,165,660,600
Configuration File Reference DIAL_TONE4_TIMING (Page 285)
4.6.5.5 Reorder Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
150 Administrator Guide Document Version 2015-12
4.6.5 Tone Settings