Password
Description Specifies the authentication password used to access the XML
application server.
Value Range Max. 128 characters
Default Value Not stored.
Configuration File Reference XMLAPP_USERPASS (Page 210)
Local XML Port
Description Specifies the local HTTP port for XML application.
Value Range 1–65535
Default Value 6666
Configuration File Reference XML_HTTPD_PORT (Page 211)
Bootup URL
Description Specifies the URL that is accessed when the unit starts up, to check for
XML data.
Value Range Max. 256 characters
Default Value Not stored.
Configuration File Reference XMLAPP_START_URL (Page 212)
Initial URL
Description Specifies the URL that is accessed when the application is started from
the unit's menu, to check for XML data.
Value Range Max. 256 characters
Default Value Not stored.
Configuration File Reference XMLAPP_INITIAL_URL (Page 212)
Incoming Call URL
Description Specifies the URL that is accessed when the unit receives a call, to
check for XML data.
Value Range Max. 256 characters
Default Value Not stored.
Configuration File Reference XMLAPP_INCOMING_URL (Page 212)
100 Administrator Guide Document Version 2015-07
4.3.9 XML Application Settings
To Next Page
Loading...
