Panasonic KX-HDV230 - Basic Network Settings

5.3.2 Basic Network Settings
IP_ADDR_MODE
Value Format INTEGER
Description Specifies the IP addressing mode.
Value Range
• 0: IPv4
• 1: IPv6
• 2: IPv4&IPv6
Default Value 0
Web User Interface Reference IP Addressing Mode (Page 77)
CONNECTION_TYPE
Value Format INTEGER
Description Specifies whether to assign the IP address automatically (DHCP) or
manually (static) for IPv4.
Value Range
• 0: Static
• 1: DHCP
Default Value 1
Web User Interface Reference Connection Mode (Page 77)
STATIC_IP_ADDRESS
Value Format IPADDR
Description Specifies the IP address for the unit for IPv4.
Note
• This setting is available only when
"CONNECTION_TYPE" is
set to "0".
• When you specify this parameter, you must specify
"STATIC_SUBNET" together in a configuration file.
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Empty string
Web User Interface Reference IP Address (Page 78)
STATIC_SUBNET
Value Format IPADDR
186 Administrator Guide Document Version 2015-07
5.3.2 Basic Network Settings