ANNEX_G_STUN_USER_ID
Value Format STRING
Description Specifies the STUN user name to be used in Binding Requests (only if
message integrity has been requested by the STUN server).
Note
• If
the value for this setting is an empty string, the CPE must not
send STUN Binding Requests with message integrity.
Value Range Max. 256 characters (except ", &, ', :, <, >, and space)
Default Value Empty string
ANNEX_G_STUN_PASS
Value Format STRING
Description Specifies the STUN password to be used in computing the
MESSAGE-INTEGRITY attribute used in Binding Requests (only if
message integrity has been requested by the STUN server). When
read, this parameter returns an empty string, regardless of the actual
value.
Value Range Max. 256 characters (except ", &, ', :, <, >, and space)
Default Value Empty string
ANNEX_G_STUN_MAX_KEEP_ALIVE
Value Format INTEGER
Description Specifies the maximum period, in seconds, that STUN Binding
Requests must be sent by the CPE for the purpose of maintaining the
binding in the Gateway. This applies specifically to Binding Requests
sent from the UDP Connection Request address and port.
Note
• This setting is available only when
"ANNEX_G_STUN_ENABLE" is set to "Y".
Value Range 1–3600
Default Value 300
ANNEX_G_STUN_MIN_KEEP_ALIVE
Value Format INTEGER
208 Administrator Guide Document Version 2015-07
5.3.9 TR-069 Settings
To Next Page
Loading...
