Default Value Not stored.
Note
• When
a user logs in to the Web user interface for the first time,
after clicking OK on the authentication dialog box, the [Initial
User Password Settings] screen is displayed automatically to
make the user set a password.
Configuration File Reference USER_PASS (Page 203)
Confirm New Password
Description Specifies the same password that you entered in [New Password
] for
confirmation.
Value Range 6–64
characters (except !, ", #, $, %, &, ', (, ), *, +, ,, /, :, ;, <, =, >, ?, [, ],
^, `, {, |, }, ~, \ and space)
Default Value Not stored.
4.4.3 Admin Password Settings
This
screen allows you to change the password used to authenticate the Administrator account when logging
in to the Web user interface.
Note
• For
security reasons, the characters entered for the password are masked by special characters, which
differ depending on the Web browser.
• After you change the administrator password, the next time you access the Web user interface, the
authentication dialog box appears. Three consecutive login failures will result in an error ("401
Unauthorized"). This restriction only applies the first time you attempt to log in after changing the
password. In all other circumstances, an error occurs after 3 unsuccessful login attempts.
Document Version 2015-07 Administrator Guide 111
4.4.3 Admin Password Settings
To Next Page
Loading...
