PORT_PUNCH_INTVL
Value Format INTEGER
Description Specifies the interval, in seconds, between transmissions of the Keep
Alive packet in order to maintain the NAT binding information for SIP
packet.
Value Range 0, 10–300
0: Disable
Default Value 0
Web User Interface Reference Enable Port Punching for SIP (Page 120)
RTP_PORT_PUNCH_INTVL
Value Format INTEGER
Description Specifies the interval, in seconds, between transmissions of the Keep
Alive packet in order to maintain the NAT binding information for RTP
packet.
Value Range 0, 10–300
0: Disable
Default Value 0
Web User Interface Reference Enable Port Punching for RTP (Page 120)
5.3.22 SIP Settings
SIP_USER_AGENT
Value Format STRING
Description Specifies the text string to send as the user agent in the headers of SIP
messages.
Value Range Max. 64 characters
Note
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower
-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic-{MODEL}/{fwver} ({mac})
Web User Interface Reference User Agent (Page 119)
Document Version 2015-07 Administrator Guide 241
5.3.22 SIP Settings
To Next Page
Loading...
