Description Specifies the URL where the firmware file is stored.
Note
• This setting is available only when
"FIRM_UPGRADE_ENABLE" is set to "Y".
Value Range Max. 384 characters
Default Value Empty string
Web User Interface Reference Firmware File URL (Page 160)
FIRM_VERSION
Value Format STRING
Description Specifies the firmware version of the unit.
Value Range Max. 32 characters
Default Value Empty string
5.3.7 HTTP Settings
HTTP_VER
Value Format INTEGER
Description Specifies which version of the HTTP protocol to use for HTTP
communication.
Value Range
• 1 (Use HTTP 1.0)
• 0 (Use HTTP 1.1)
Note
• For
this unit, it is strongly recommended that you specify "1" for
this setting. However, if the HTTP server does not function well
with HTTP 1.0, try changing the setting "0".
Default Value 1
Web User Interface Reference HTTP Version (Page 85)
HTTP_USER_AGENT
Value Format STRING
Description Specifies the text string to send as the user agent in the header of HTTP
requests.
200 Administrator Guide Document Version 2015-07
5.3.7 HTTP Settings
To Next Page
Loading...
