SRV lookup Prefix for TCP
Description Specifies a prefix to add to the domain name when performing a DNS
SRV lookup using TCP.
Note
• This setting is available only when [Enable DNS SRV
lookup] is set to [Yes].
Value Range Max. 32 characters
Default Value _sip._tcp.
Configuration File Reference SIP_TCP_SRV_PREFIX_n (Page 247)
SRV lookup Prefix for TLS
Description Specifies a prefix to add to the domain name when performing a DNS
SRV lookup using TLS.
Note
• This setting is available only when [Enable DNS SRV
lookup] is set to [Yes].
Value Range Max. 32 characters
Default Value _sips._tls.
Configuration File Reference SIP_TLS_SRV_PREFIX_n (Page 266)
Local SIP Port
Description Specifies the source port number used by the unit for SIP
communication.
Value Range 1024–49151
Default Value 5060 (for Line 1)
5070 (for Line 2)
5080 (for Line 3)
5090 (for Line 4)
5100 (for Line 5)
5110 (for Line 6)
Configuration File Reference SIP_SRC_PORT_n (Page 245)
Document Version 2015-07 Administrator Guide 125
4.5.2 SIP Settings [Line 1]–[Line 6]
To Next Page
Loading...
