Panasonic KX-HDV230 - Settings Using Web User Interface Programming

Button Description Lamp Indication
Transfer Used to transfer a call to the assigned extension
in the key with confirmation, during a
conversation.
–
Blind
Transfer
Used to transfer a call to the assigned extension
in the key without confirmation, during a
conversation.
–
Conference Used to establish a multiple-party conversation
(conference).
–
Directed
Call Pickup
Used to answer an incoming call arriving at the
specified telephone number.
–
Call Park
*1
Used to transfer a call to Call Parking.
–
Call Park
Retrieve
*1
Used to retrieve a parked call (Call Parking).
–
*1
This is an optional feature and may not be supported on your phone system.
6.3.1 Settings using Web User Interface Programming
To set Flexible Keys
1. In the Web user interface, click the [Telephone] tab, and then click [Flexible Key Settings].
2. Enter settings as described in the following table.
When it is necessary to set both parameter 1 and parameter 2, enter a comma between the values.
Button
Parameter 1 Parameter 2
Description Value Description Value
One Touch
Dial
Phone Number Up to 32 digits Line No. 1–6
BLF (Busy
Lamp
Field)
*1
Phone Number Up to 32 digits Line No. 1–6
Line Line No. 1–6
– –
ACD Line No. 1–6
– –
Wrap Up Line No. 1–6
– –
Line Status
– – – –
Call
Forward
Phone Number Up to 32 digits
– –
Phonebook Classification
• 0: Local & Remote
• 1: Local Phonebook
• 2: Remote
Phonebook
Category 1–9
Document Version 2015-07 Administrator Guide 325
6.3.1 Settings using Web User Interface Programming