4.7.4.1 Export Logging File
Logging File Type
Description Selects the Logging File Type setting.
Value Range
• Power Down
• Event
• SIP Packet
Note
• The line break code for the log file is
<LF>.
• If a file is exported when Power Down is selected, the saved file
is power.log.
• If a file is exported when Event is selected, the saved file is
event_log.txt.
• If a file is exported when SIP Packet is selected, the saved file
is sip_trace_log.txt.
Default Value Power Down
4.7.5 Reset to Defaults
This
screen allows you to reset the carrier default settings made through the Web user interface to their default
values by clicking [Reset to Carrier Defaults]. After you click this button, a dialog box is displayed, asking
whether you want to reset the settings. Click OK to reset, or Cancel not to.
Notice
• After resetting the settings, the unit will restart even if it is being accessed through the phone user
interface, or on calls.
Note
• You can specify carrier default using configuration parameter extensions. Those parameters will be
reset to the specified carrier default values.
(→see Parameter Extensions)
4.7.6 Restart
This screen allows you to restart the unit by clicking [Restart]. After you click this button, a dialog box is
displayed, asking whether you want to restart the unit. Click OK to perform a restart, or Cancel not to.
162 Administrator Guide Document Version 2015-07
4.7.6 Restart
To Next Page
Loading...
