Panasonic KX-HDV230 - SIP Settings [Line 1]-[Line 6]; Basic; Phone Number; Registrar Server Address

Configuration File Reference RTP_PORT_PUNCH_INTVL (Page 241)
4.5.2 SIP Settings [Line 1]–[Line 6]
This screen allows you to change the SIP settings that are specific to each line.
4.5.2.1 Basic
Phone Number
Description Specifies the phone number to use as the user ID required for
registration to the SIP registrar server.
Note
• When registering using a user ID that is not a phone number,
you should use the [SIP URI] setting.
Value Range Max. 32 characters
Default Value Not stored.
Configuration File Reference PHONE_NUMBER_n (Page 242)
Registrar Server Address
Description Specifies the IP address or FQDN of the SIP registrar server.
Value Range Max. 256 characters
Default Value Not stored.
Document Version 2015-07 Administrator Guide 121
4.5.2 SIP Settings [Line 1]–[Line 6]