Value Range Max. 64 characters
Note
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower
-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Web User Interface Reference HTTP User Agent (Page 86)
HTTP_AUTH_ID
Value Format STRING
Description Specifies the authentication ID required to access the HTTP server.
Value Range Max. 128 characters
Default Value Empty string
Web User Interface Reference Authentication ID (Page 86)
HTTP_AUTH_PASS
Value Format STRING
Description Specifies the authentication password required to access the HTTP
server.
Value Range Max. 128 characters
Default Value Empty string
Web User Interface Reference Authentication Password (Page 86)
HTTP_PROXY_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable or disable the HTTP proxy feature.
Value Range
• Y: Enable HTTP proxy connect
• N: Disable
Default Value
N
Web User Interface Reference Enable Proxy (Page 87)
Document Version 2015-07 Administrator Guide 201
5.3.7 HTTP Settings
To Next Page
Loading...
