4.3.4 STUN Settings
This screen allows you to change the STUN Settings.
4.3.4.1 STUN
STUN: Simple Traversal of UDP through NATs
Server Address
Description Specifies the host name or IP address of the STUN server for the CPE
to send Binding Requests.
Value Range Max. 256 characters
Default Value Not stored.
Configuration File Reference STUN_SERV_ADDR (Page 239)
Port
Description Specifies the port number of the STUN server for the CPE to send
Binding Requests.
Value Range 1–65535
Default Value 3478
Configuration File Reference STUN_SERV_PORT (Page 239)
88 Administrator Guide Document Version 2015-07
4.3.4 STUN Settings
To Next Page
Loading...
