Panasonic KX-HDV230 - Dial_Plan_Not_Match_Enable_N

Value Range Max. 1000 characters
Default Value Empty string
Web User Interface Reference Dial Plan (max 1000 columns) (Page 147)
DIAL_PLAN_NOT_MATCH_ENABLE_n
Parameter Name Example DIAL_PLAN_NOT_MATCH_ENABLE_1,
DIAL_PLAN_NOT_MATCH_ENABLE
_2, ...,
DIAL_PLAN_NOT_MATCH_ENABLE_6
Value Format BOOLEAN
Description Specifies whether to enable dial plan filtering so that a call is not made
when the dialed number does not match any of the dial formats
specified in "DIAL_PLAN_n".
Value Range
• Y (Enable dial plan filtering)
• N (Disable dial plan filtering)
Note
• If set to
"Y", the dialed number will not be sent to the line when
the number dialed by the user does not match any of the dial
formats specified in the dial plan.
• If set to "N", the dialed number will be sent to the line, even if
the number dialed by the user does not match any of the dial
formats specified in the dial plan.
Default Value
N
Web User Interface Reference Call Even If Dial Plan Does Not Match (Page 147)
MACRODIGIT_TIM
Value Format INTEGER
Description Specifies the length of time, in seconds, that the unit waits when a "T"
or "t" has been entered in the dial plan.
Value Range 1–15
Default Value 5
Web User Interface Reference Timer for Dial Plan (Page 138)
INTERNATIONAL_ACCESS_CODE
Value Format STRING
Description Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains
"+".
Document Version 2015-07 Administrator Guide 303
5.3.34 Call Control Settings