Panasonic KX-HDV230 - Status

Maintenance
Menu Item Section Title Setting
Access
Level
*1
Ref.
U A
Provisioning
Maintenance
Provisioning
Maintenance
Standard File URL
*2
ü
Page 158
Product File URL
*2
ü
Page 158
Master File URL
*2
ü
Page 158
Cyclic Auto Resync
*2
ü
Page 159
Resync Interval
*2
ü
Page 159
Time Resync
*2
ü
Page 159
Header Value for Resync
Event
*2
ü
Page 159
Firmware
Maintenance
Firmware Maintenance Enable Firmware Update
*2
ü
Page 160
Firmware File URL
*2
ü
Page 160
Upgrade
Firmware
Upgrade Firmware File Name
ü
Page 161
Export Logging
File
Export Logging File Logging File Type
ü
Page 162
Reset to Defaults Reset to Carrier Defaults The following settings will be
reset to carrier default values
when you click [Reset to
Carrier Defaults].
ü
Page 162
Restart Restart Click [Restart] to proceed.
Restarting will take a few
moments.
ü
Page 162
*1
The access levels are abbreviated as follows:
U: User; A: Administrator
A check mark indicates that the setting is available for that access level.
*2
This setting can also be configured through configuration file programming.
4.2 Status
This section provides detailed descriptions about all the settings classified under the [Status] tab.
Document Version 2015-07 Administrator Guide 69
4.2 Status