Value Range
• HTTP/1.0
• HTTP/1.1
Note
• For
this unit, it is strongly recommended that you select [HTTP/
1.0]. However, if the HTTP server does not function well with
HTTP/1.0, try changing the setting [HTTP/1.1].
Default Value HTTP/1.0
Configuration File Reference HTTP_VER (Page 200)
HTTP User Agent
Description Specifies the text string to send as the user agent in the header of HTTP
requests.
Value Range Max. 64 characters
Note
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower
-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Configuration File Reference HTTP_USER_AGENT (Page 200)
Authentication ID
Description Specifies the ID for the User account. If set, this name must be entered
to access the Web user interface at the User access level.
Value Range Max. 128 characters
Default Value Not stored.
Configuration File Reference HTTP_AUTH_ID (Page 201)
Authentication Password
Description Specifies the password for the User account. If set, this password must
be entered to access the Web user interface at the User access level.
Value Range Max. 128 characters
Default Value Not stored.
Configuration File Reference HTTP_AUTH_PASS (Page 201)
86 Administrator Guide Document Version 2015-07
4.3.3 HTTP Client Settings
To Next Page
Loading...
