SIP_100REL_ENABLE_n
Parameter Name Example SIP_100REL_ENABLE_1, SIP_100REL_ENABLE
_2, ...,
SIP_100REL_ENABLE_6
Value Format BOOLEAN
Description Specifies whether to add the option tag 100rel to the "Supported"
header of the INVITE message. For details, refer to RFC 3262.
Value Range
• Y (Enable 100rel function)
• N (Disable 100rel function)
Note
• If set to "Y", the Reliability of Provisional Responses function
will be enabled. The option tag 100rel will be added to the
"Supported" header of the INVITE message and to the
"Require" header of the
"1xx" provisional message.
• If set to "N", the option tag 100rel will not be used.
Default Value
Y
Web User Interface Reference Enable 100rel (RFC 3262) (Page 127)
SIP_18X_RTX_INTVL_n
Parameter Name Example SIP_18X_RTX_INTVL_1, SIP_18X_RTX_INTVL
_2, ...,
SIP_18X_RTX_INTVL_6
Value Format INTEGER
Description Specifies the retransmission interval, in seconds, for "18x" responses.
Value Range 0, 1–600 (0: Disable)
Default Value 0
SIP_SUBS_EXPIRE_n
Parameter Name Example SIP_SUBS_EXPIRE_1, SIP_SUBS_EXPIRE
_2, ...,
SIP_SUBS_EXPIRE_6
Value Format INTEGER
Description Specifies the length of time, in seconds, that the subscription remains
valid. This value is set in the "Expires
" header of the SUBSCRIBE
request.
Value Range 1–4294967295
Default Value 3600
252 Administrator Guide Document Version 2015-07
5.3.22 SIP Settings
To Next Page
Loading...
