4.7.2 Firmware Maintenance
This screen allows you to perform firmware updates automatically.
4.7.2.1 Firmware Maintenance
Enable Firmware Update
Description Selects whether to perform firmware updates when the unit detects a
newer version of firmware.
Note
• Manual firmware updates from the Web user interface
(® see
4.7.3 Upgrade Firmware) can be performed regardless of this
setting.
• Firmware updates using TR-069 can be performed regardless
of this setting.
Value Range
• Yes
• No
Default Value Yes
Configuration File Reference FIRM_UPGRADE_ENABLE (Page 199)
Firmware File URL
Description Specifies the URI where the firmware file is stored.
Note
• This setting is available only when [Enable Firmware
Update] is set to [Yes].
Value Range Max. 384 characters
Default Value Not stored.
Configuration File Reference FIRM_FILE_PATH (Page 199)
160 Administrator Guide Document Version 2015-07
4.7.2 Firmware Maintenance
To Next Page
Loading...
