Value Format INTEGER
Description Specifies whether to set "a=inactive " or not when the call is on hold.
Value Range
• 0: send only
• 1: inactive
Default Value 0
SDP_USER_ID_n
Parameter Name Example SDP_USER_ID_1, SDP_USER_ID
_2, ..., SDP_USER_ID_6
Value Format STRING
Description Specifies the user ID used in the "o=" line field of SDP.
Value Range Max. 32 characters
Default Value Empty string
TELEVENT_PAYLOAD
Value Format INTEGER
Description Specifies the RFC 2833 payload type for DTMF tones.
Note
• This
setting is available only when "OUTBANDDTMF_n" is set to
"Y".
Value Range 96–127
Default Value 101
Web User Interface Reference Telephone-event Payload Type (Page 130)
HOLD_SOUND_PATH_n
Parameter Name Example HOLD_SOUND_PATH_1, HOLD_SOUND_PATH
_2, ...,
HOLD_SOUND_PATH_6
Value Format INTEGER
Description Specifies whether the unit’s
hold tone or the network server’s hold tone
(Music on hold) is played when a party is put on hold.
Note
• It
is necessary to set the following parameters to play the unit’s
hold tone.
– HOLD_TONE_FRQ
– HOLD_TONE_GAIN
Document Version 2015-07 Administrator Guide 263
5.3.22 SIP Settings
To Next Page
Loading...
