4.6.2 Call Control [Line 1]–[Line 6]
This screen allows you to configure various call features that are specific to each line.
4.6.2.1 Call Features
Display Name
Description Specifies the name to display as the caller on the other party’s phone
when you make a call.
Value Range Max. 24 characters
Note
• You can use Unicode characters for this setting.
Default Value Not stored.
Configuration File Reference DISPLAY_NAME_n (Page 301)
Voice Mail Access Number
Description Specifies the phone number used to access the voice mail server.
Note
• Your phone system must support voice mail.
142 Administrator Guide Document Version 2015-07
4.6.2 Call Control [Line 1]–[Line 6]
To Next Page
Loading...
