SIP_ANM_HOSTNAME_n
Parameter Name Example SIP_ANM_HOSTNAME_1, SIP_ANM_HOSTNAME
_2, ...,
SIP_ANM_HOSTNAME_6
Value Format BOOLEAN
Description Specifies whether to set an anonymous host name in the "From"
header
when making anonymous calls.
Value Range
• Y (Use "anonymous.invalid
" for host name)
• N (Use normal host name)
Default Value
N
SIP_DETECT_SSAF_n
Parameter Name Example SIP_DETECT_SSAF_1, SIP_DETECT_SSAF
_2, ...,
SIP_DETECT_SSAF_6
Value Format BOOLEAN
Description Specifies whether to enable SSAF for the SIP servers (registrar
server,
proxy server, and presence server).
Value Range
• Y (Enable SSAF)
• N (Disable SSAF)
Note
• If set to "Y", the unit receives SIP messages only from the
source addresses stored in the SIP servers (registrar server,
proxy server, and presence server), and not from other
addresses. However, if "SIP_OUTPROXY_ADDR
_n" in
5.3.22 SIP Settings is specified, the unit also receives SIP
messages from the source address stored in the SIP outbound
proxy server.
Default Value
N
Web User Interface Reference Enable SSAF (SIP Source Address Filter) (Page 128)
SIP_RCV_DET_HEADER_n
Parameter Name Example SIP_RCV_DET_HEADER_1, SIP_RCV_DET_HEADER
_2, ...,
SIP_RCV_DET_HEADER_6
Value Format BOOLEAN
Description Specifies whether to check the user name part of the SIP URI in the
"To" header when receiving the INVITE message with an incorrect
target SIP URI.
Document Version 2015-07 Administrator Guide 255
5.3.22 SIP Settings
To Next Page
Loading...
