Panasonic KX-HDV230 - Dscp_Sip_N

Default Value SIP_SRC_PORT_1="5060"
SIP_SRC_PORT
_2="5070"
SIP_SRC_PORT_3="5080"
SIP_SRC_PORT_4="5090"
SIP_SRC_PORT_5="5100"
SIP_SRC_PORT_6="5110"
Web User Interface Reference Local SIP Port (Page 125)
DSCP_SIP_n
Parameter Name Example DSCP_SIP_1, DSCP_SIP_2, ..., DSCP_SIP_6
Value Format INTEGER
Description Specifies the DSCP level of DiffServ applied to SIP packets.
Value Range 0–63
Default Value 0
Web User Interface Reference SIP Packet QoS (DSCP) (Page 124)
SIP_DNSSRV_ENA_n
Parameter Name Example SIP_DNSSRV_ENA_1, SIP_DNSSRV_ENA
_2, ...,
SIP_DNSSRV_ENA_6
Value Format BOOLEAN
Description Specifies whether to request the DNS server to translate domain names
into IP addresses using the SRV record.
Value Range
• Y (Enable DNS SRV lookup)
• N (Disable DNS SRV lookup)
Note
• If set to "Y", the unit will perform a DNS SRV lookup for a SIP
registrar server, SIP proxy server, SIP outbound proxy server,
or SIP presence server.
• If set to "N", the unit will not perform a DNS SRV lookup for a
SIP registrar server, SIP proxy server, SIP outbound proxy
server, or SIP presence server.
Default Value
Y
Web User Interface Reference Enable DNS SRV lookup (Page 124)
SIP_UDP_SRV_PREFIX_n
Parameter Name Example SIP_UDP_SRV_PREFIX_1, SIP_UDP_SRV_PREFIX
_2, ...,
SIP_UDP_SRV_PREFIX_6
246 Administrator Guide Document Version 2015-07
5.3.22 SIP Settings